Advanced Routing and Switching for Field Engineers : 642-066 Exam

642-066 ARSFE
Advanced Routing and Switching for Field Engineers

Exam Number: 642-066
Associated Certifications: Advanced Routing and Switching for Field Engineers
Duration: 75 minutes (60-70 Questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics
Exam Description
The 642-066 ARSFE Advanced Routing and Switching for Field Engineers exam is the exam associated with the Cisco Routing and Switching Field Specialist certification. This exam tests a candidate’s knowledge of configuring and implementing the advanced capabilities of Cisco routing and switching solutions; verifying and troubleshooting the advanced capabilities of Cisco routing and switching solutions.. Candidates can prepare for this exam by taking the ARSFE Advanced Routing and Switching for Field Engineers course.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Configure and implement the advanced capabilities of Cisco routing and switching solutions
Configure and implement the advanced capabilities of Cisco routers and Catalyst switches
Implement MPLS
Implement High Availability features
Implement and configure network management

Verify and troubleshoot the advanced capabilities of Cisco routing and switching solutions
Verify and troubleshoot the advanced capabilities of Cisco routers and Catalyst switches
Verify and troubleshoot a QoS Design
Verify and troubleshoot an MPLS design
Verify and troubleshoot a High Availability design
Verify and troubleshoot Cisco devices in a multi vendor device environment
Verify and troubleshoot network management configurations

Exam Number/Code: 642-066
Exam Name:Advanced Routing and Switching for Field Engineers

“Advanced Routing and Switching for Field Engineers”, also known as 642-066 exam, is a Cisco certification. With the complete collection of questions and answers, Actualtests has assembled to take you through 68 Q&As to your 642-066 Exam preparation. In the 642-066 exam resources, you will cover every field and category in Access Routing and LAN Switching helping to ready you for your successful Cisco Certification.
Free Demo DownloadActualtests offers free demo for 642-066 exam (Advanced Routing and Switching for Field Engineers). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.

Free Sample :PassGuide-it certification Printable PDF Or software Download: Actualtest offers free demo for IT certification Exams You can check out the interface, question quality and usability of our IT Simulation exams before you decide to buy it. We are the only one site can offer demo for almost all products http://demo.passguide.com/download

QUESTION 11
You are considering deploying the Cisco SSL VPN AIM module in a Cisco 1800 Series
Router. Which benefit should you expect?
A. To improve performance up to 300% for both IPSec and SSL VPN applications
B. To improve performance exclusively for SSL VPN applications
C. To improve performance for both IPSec and SSL VPN applications with IPSec
encryption taking place in hardware
D. To improve performance up to 200% for both IPSec and SSL VPN applications with
encryption taking place in hardware
E. To improve performance up to 300% for both the IPSec and SSL VPN applications
with SSL encryption taking place in hardware
Answer: D
QUESTION 12
What is the function of the no switchport catalyst switch interface configuration
command?
A. Disables the interfaces to prevent traffic flow
B. Clears all the configurations on the interface
C. Switches the port from access mode to trunk mode
642-066
Actualtests.com – The Power of Knowing
D. Enables the interface for Layer 2 switching
E. Converts the port from physical Layer 2 port to physical Layer 3 port
Answer: E
QUESTION 13
When implementing MPLS VPNs between CE and PE routers, which of these statements
is correct?
A. If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required,
but any other protocol or static route will require redistribution
B. If using IS-IS as the PE-CE routing protocol, no redistribution is required
C. If using static routes between the CE and PE routers, no redistribution of other VPN
routes is required
D. If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is
required
E. If RIP is the routing protocol the is used between the PE-CE routers, no redistribution
is required but any other protocol will require redistribution
Answer: D
QUESTION 14
What are three pieces of information that the Cisco IOS show inventory command
displays on a Cisco ISR Router? (Choose three.)
A. Installed Hardware serial numbers
B. The status of installed hardware
C. Main Power Supply Condition
D. System Internal temperature
E. Installed hardware
F. Unique Device Identifier
Answer: A,E,F
QUESTION 15
Network Topology Exhibit:
642-066
Actualtests.com – The Power of Knowing
Exhibit:
You work as a network engineer at Certkiller .com. You study the exhibit carefully. You
have a non-Cisco switch that is not communicating properly while connected to the
distribution-layer Cisco Switching fabric. Which two best-practice actions can you take
to overcome this problem? (Choose two.)
A. Turn on MST ( 802.1s) on all switches
B. Turn off MST ( 802.1s ) on all switches
C. Turn off RSTP ( 802.1w) on all switches
D. Turn on RSTP ( 802.1w) on all switches
Answer: A,C
QUESTION 16
Which one of these class maps was configured to match traffic for CS5?
A. Certkiller 2# show class-map forward
Class map match-all forward ( id 3)
Match ip dscp 18
642-066
Actualtests.com – The Power of Knowing
B. Certkiller 2#show access-map block
Class map match-all block (id 4)
Match ip dscp 43
C. Certkiller 2# show class-map real-time
Class map match-all block (id 5)
Match ip dscp 16
D. Certkiller 2# show class-map pass
Class map match-all real-time (id 2)
Match ip dscp 40
Answer: D
QUESTION 17
Which of these tools should you use to compress VoIP packets on a low-speed Frame
Replay circuit?
A. Cisco Proprietary payload compression
B. Predictor payload compression
C. RTP header compression
D. TCP header compression
E. FRF .9 payload compression
Answer: C
QUESTION 18
Cisco Catalyst switches support which three PVLAN port types? (Choose three.)
A. Promiscuous
B. Non-Isolated
C. Isolated
D. Community
E. Private
F. Permanent
Answer: A,C,D
QUESTION 19
You are trying to initiate an SSH connection to a remote router and are getting rejected
with an error code of 0. Which of these might be the cause of the error?
A. You are trying to log in using invalid credentials
B. The RSA key pair is not properly configured on the SSH client
C. The RSA key pair is not properly configured on the SSH server
D. The routers are using different SSH versions
Answer: D
642-066
Actualtests.com – The Power of Knowing
QUESTION 20
Which of these is a prerequisite for and must always run with Cisco NSF?
A. RPR
B. BGP
C. SSO
D. SRM
Answer: C

Free download:pass4sure 642-066
Free download?testking 642-066

Download Free PassGuide Product, Help you pass any it Exams,Click Me

Actualtests Free Downloads

Type	Exam Bible	NEW Questions & Answers	Latest Updated	Download link
	All Actual-Test 's Exam Pack	858	1 days ago	Full Download

Download Free Latest Actualtests Certification Braindumps

1. Free Actualtest Actualtests 650-059
2. Free Actualtest 642-055
3. Free Actualtest 642-066
4. Free Actualtest Actualtests 642-061
5. Free Actualtest Actualtests 642-383
6. Free Actualtest Actualtests CCSP 642-515
7. Free Actualtest Actualtests 642-652
8. Free Actualtest Actualtests 646-003
9. Free Actualtest All Cisco At List & Release Date
10. Free Actualtest Actualtests 642-587