Actualtests 642-356
Cisco Storage Networking Solutions Support Specialist(CSSSS) : 642-356 Exam
642-356 CSSSS
Cisco Storage Networking Solutions Support Specialist
Exam Number: 642-356
Associated Certifications: Data Center Storage Networking
Duration: 60 minutes (50-60 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions
Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 642-356 CSSSS Cisco Storage Networking Solutions Support Specialist exam is the exam associated with the Data Center Storage Networking specialization. Candidates can prepare for this exam by taking the ICSN Implementing Cisco Storage Network and ICASN Implementing Cisco Advanced Storage Network course/s. This exam tests a candidate’s knowledge of The Cisco Storage Networking Solutions Support Specialist validates an individual’s knowledge of installing, configuring, and troubleshooting Cisco storage products to maintain a highly scalable, efficient, high performing storage networking environment. Cisco Storage Networking Support Specialist professionals understand how to deploy and optimize the features and benefits of the Cisco MDS 9000 Series Multilayer Directors and Switches, Cisco MDS 9509 Director Switch, Cisco 9216 Fabric Switch, and Cisco MDS 9120 products to provide fast and accurate resolution to network installation and customer service issues.. Topics covered include implementing appropriate IP configurations, Installing a Cisco Storage Solution, Implementing Cisco Storage equipment in multi-vendor multiprotocol environments, Implement the fabric design from the design document, Configuring security in a multiprotocol storage environment, Analyzing and tuning customer configurations to optimize application performance in multiprotocol storage networks and Troubleshooting SAN infrastructure.
Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.
Implement appropriate IP configurations
Implement IP addressing (IPv4 & IPv6).
Implement MTU.
Describe encapsulation for a storage solution.
Implement static routes.
Implement VLANs.
Implement ACLs.
Install a Cisco Storage Solution
Demonstrate a high level understanding of SAN technology.
Demonstrate knowledge of SAN Applications and Topologies (Layer 6 & up).
Identify environmental considerations.
Determine installation process steps & expected outcomes.
Identify & mitigate design and installation implications.
Perform initial setup tasks.
Perform routine administrative tasks.
Validate operational function of Cisco Storage Solution.
Implement Cisco Storage equipment in multi-vendor multiprotocol environments
Demonstrate knowledge of interoperability standards and industry implementations.
Determine configuration requirements based on information provided on a design document.
Configure the appropriate interoperability settings.
Implement the fabric design from the design document
Configure the correct system & interface configuration parameters.
Minimize disruption to the existing fabric during device installation and configuration.
Configure appropriate VSANs and Inter VSAN Routing (IVR).
Configure zoning.
Configure management infrastructure.
Configure correct licensing to insure proper licensing compliance.
Verify proper configuration using appropriate tools.
Configure static domain IDs & persistent FC IDs.
Configure security in a multiprotocol storage environment
Configure fibre channel port & fabric security.
Configure security for iSCSI.
Configure security for SAN Extension.
Configure security for data management path, including ACLs.
Configure VSAN-based roles.
Configure AAA services.
Analyze and tune customer configurations to optimize application performance in multiprotocol storage networks
Monitor network status with RMON / SNMP to identify potential problems.
Monitor control plane and data plane flows with Port Analyzer Adapter and Ethereal.
Verify performance statistics with Device Manager / Fabric Manager.
Chart performance with Performance Manager to identify trends and potential problems.
Capture SCSI level protocol flows using Traffic Analyzer.
Validate tuning performance using SAN Extension Tuner.
Configure traffic engineering to manage congestion and provide prioritization.
Configure TCP/IP parameters for optimizing performance of storage flows.
Configure write & tape acceleration to optimize bandwidth usage.
Configure proper compression deployment.
Troubleshoot SAN infrastructure
Capture and analyze fibre channel control flows using Fabric Analyzer.
Configure RMON, SNMP, and Call Home for detecting problems.
Troubleshoot problems and or failures using Device Manager / Fabric Manager.
Troubleshoot problems and failures using Command Line Diagnostic tools, show and debug commands.
Configure SPAN & RSPAN to capture data & control flows.
Configure and interpret the various system logs.
From the switch, verify host connectivity.
From the switch, verify connectivity from the host to the storage.
Diagnosing problems with switch upgrades.
Select appropriate repair strategy to resolve problems while minimizing disruption.
Exam Number/Code: 642-356
Exam Name:Cisco Storage Networking Solutions Support Specialist(CSSSS)
“Cisco Storage Networking Solutions Support Specialist(CSSSS)”, also known as 642-356 exam, is a Cisco certification. With the complete collection of questions and answers, Actualtests has assembled to take you through 60 Q&As to your 642-356 Exam preparation. In the 642-356 exam resources, you will cover every field and category in Storage Networking helping to ready you for your successful Cisco Certification.
Free Demo DownloadActualtests offers free demo for 642-356 exam (Cisco Storage Networking Solutions Support Specialist(CSSSS)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.
QUESTION 11:
What information does the command show flogi database provide?
A. Verifies that attached devices are in the correct zone
B. Displays a list of the host ports that have logged into each storage port
C. Displays fabric login errors
D. Verifies connectivity for attached devices
Answer: D
QUESTION 12:
You have set up a session to the SD_Port to enable the investigation of a problem on a
particular Fibre Channel Port. You need to check whether this has been correctly set up
for the desired port. Which command should you use?
A. Show fcflow
B. Show fcanalyzer
C. Show span session
D. Show tlport
Answer: C
QUESTION 13:
The output from the switch show interface command indicates that the link from a host
comes up as an FL_port. The switch port is configured as auto. Which three of these
HBA configuration could cause this scenario? (Choose three.)
A. The HBA is configured as an TL_Port
B. The HBA is configured as an N_Port
C. The HBA supports only NL_mode
642-356
Actualtests.com - The Power of Knowing
D. The HBA supports only FC_AL technology
E. The HBA is configured as an NL_Port
F. The HBA is configured as a TE_Port
Answer: C,D,E
QUESTION 14:
During initial switch configuration, the administrator elects to enable full zoneset
distribution. What is the impact of this choice during zoneset activation?
A. Only the active zoneset is distributed to all switches in the fabric
B. Both the full zone database and active zoneset are distributed to all switches in the
fabric
C. Both FCID and WWN information are distributed to all switches in the fabric
D. Only the full zone database is distributed to all switches in the fabric
Answer: B
QUESTION 15:
Which feature detects hardware faults and attempts recovery actions?
A. Switch Health Analysis
B. End-to-End Connectivity Analysis
C. Fabric Configuration Analysis
D. Online Health Management System
E. Cisco Fabric Services
Answer: D
QUESTION 16:
You are implementing an FCIP solution for SAN extension between two data centers
using the Cisco MDS 9000 Series platform. For redundancy, there are two Metro
Ethernet paths between the data centers. How can you specify primary and secondary
paths for each FCIP tunnel?
A. Configure QoS on the MDS switch
B. Configure OSPF routing on the IPS-8
C. Configure FSPF link costs on the MDS switch
D. Configure EIGRP routing on the IPS-8
Answer: C
642-356
Actualtests.com - The Power of Knowing
QUESTION 17:
You are asked to review the running configuration of a switch that a junior administrator
has prepared to be placed in a heterogeneous SAN environment. This environment
includes three different brands of Fibre Channel switches. In this particular environment,
only VSAN 1 is being used.
Which of these attributes suggests that the switch has been incorrectly configured?
A. A static domain ID has been set to 0×21
B. Interop mode 1 has been selected
C. FCC has been enabled
D. The sr-dst-0x load balancing has been selected
Answer: A
QUESTION 18:
A host is unable to access the storage network after its HBA is replaced. Which of these
switch configurations should be preventing access?
A. Port-Security
B. Port-mode security
C. Port VSAN membership
D. Port-based zoning
Answer: A
QUESTION 19:
Why would you use the fcanalyzer command?
A. To identify common configuration errors in the fabric
B. To nondisruptively capture and decode Fibre Channel Control Frames
C. To decode and analyze Fibre Channel frames and ordered sets on a link
D. To ensure that Fibre Channel configuration settings are synchronized across all
switches in the fabric
Answer: B
QUESTION 20:
After performing the initial switch configuration by running the setup utility, an
administrator notices that ports configured to connect to other Cisco MDS 9000 switches
invariably come up as E_Ports rather than TE_Ports. Which error was made at initial
configuration?
642-356
Actualtests.com - The Power of Knowing
A. VSAN capabilities were not enabled
B. Default switchport trunk mode was set to on
C. Default switchport trunk mode was set up auto
D. Full zoneset distribution was not enabled
Answer: C
Free download:pass4sure 642-356
Free download?testking 642-356
| Actualtests Free Downloads |
|
Type |
Exam Bible | NEW Questions & Answers |
Latest Updated |
Download link |
 |
All Actual-Test 's Exam Pack |
858 |
1 days ago | Download |
Random Posts
Visited 329 times, 1 so far today
